CriticalResults
Summary values of one analysis step: load multiplier, factor of safety and the extreme (min/max) displacements, stresses and sectional forces.
The attributes are sent by OptumGX and depend on the analysis and the
model. repr() lists the ones present, and accessing one that was not
sent raises AttributeError. Values are floats, or lists of floats for
array-valued fields. The properties below are the common ones.
Examples
stage = gx.get_current_project().get_models_and_stages()[0]
cr = stage.output.critical_results
cr
cr.u_norm_max
u_norm_max = [step.critical_results.u_norm_max for step in stage.output.step]See also
Properties
- load_multiplier : float
- factor_of_safety : float
- consolidation_degree : float
- time_days : float
- u_norm_max : float
- u_x_max : float
- u_y_max : float
- u_z_max : float
- u_result_point_norm : float
- u_solid_norm_max : float
- u_solid_x_max : float
- u_solid_y_max : float
- u_solid_z_max : float
- u_solid_x_min : float
- u_solid_y_min : float
- u_solid_Z_min : float
- du_solid_norm_max : float
- du_solid_x_max : float
- du_solid_y_max : float
- du_solid_z_max : float
- du_solid_x_min : float
- du_solid_y_min : float
- du_solid_z_min : float
- sx_total_min : float
- sy_total_min : float
- sz_total_min : float
- txy_total_min : float
- tyz_total_min : float
- tzx_total_min : float
- sx_total_max : float
- sy_total_max : float
- sz_total_max : float
- txy_total_max : float
- tyz_total_max : float
- tzx_total_max : float
- sx_effective_min : float
- sy_effective_min : float
- sz_effective_min : float
- txy_effective_min : float
- tyz_effective_min : float
- tzx_effective_min : float
- sx_effective_max : float
- sy_effective_max : float
- sz_effective_max : float
- txy_effective_max : float
- tyz_effective_max : float
- tzx_effective_max : float
- u_plate_norm_max : float
- u_plate_x_max : float
- u_plate_y_max : float
- u_plate_z_max : float
- u_plate_x_min : float
- u_plate_y_min : float
- u_plate_Z_min : float
- du_plate_norm_max : float
- du_plate_x_max : float
- du_plate_y_max : float
- du_plate_z_max : float
- du_plate_x_min : float
- du_plate_y_min : float
- connector_force_min : float
- connector_force_max : float
- fixed_end_anchor_force_min : float
- fixed_end_anchor_force_max : float
- moment_plate2d_min : float
- moment_plate2d_max : float
- normal_force_plate2d_min : float
- normal_force_plate2d_max : float
- shear_force_plate2d_min : float
- shear_force_plate2d_max : float
- mx_plate3d_min : float
- mx_plate3d_max : float
- my_plate3d_min : float
- my_plate3d_max : float
- mxy_plate3d_min : float
- mxy_plate3d_max : float
- sx_plate3d_min : float
- sx_plate3d_max : float
- sy_plate3d_min : float
- sy_plate3d_max : float
- txy_plate3d_min : float
- txyx_plate3d_max : float