# Step 6: Generate Structural Documentation

## Overview

OPTUM CS features a report generator. In the generated report all inputs and results are presented in a neat and organized way. The report can be used directly as a part of the structural documentation.

## Properties and outline

Edit report properties and generate report:

*   In the REPORT tab in the ribbon, locate the _Report_ pane on right hand side and add project title, subtitle and other relevant information.
*   In the _Report Outline_ on left hand side, remove the checkmark next to the sections named "Horizontal Load Definitions", "Horizontal Load Distribution" and "Appendix D Horizontal Load Distribution". These are not relevant when defining horizontal loads manually.
*   In the report pane click the _Generate_ button.

[![](https://optumce.com/wp-content/uploads/2021/12/report-generator-1024x555.png)](https://optumce.com/wp-content/uploads/2021/12/report-generator.png)

## Content

The report consists of a front page, table of contents, a short overview, chapters describing the model geometry, properties and loads, a chapter presenting the results of the finite element calculation, a chapter presenting the results of the code check and four appendices that include details related to panel geometry, forces acting on panels, wall calculations and distribution of horizontal loads.

*   Navigate to different sections by using the Report Outline, Table of Contents and the links in the report.
*   Export the report by clicking the _Export to pdf_ button in the ribbon.

Previews of different sections are presented below.

[![](https://optumce.com/wp-content/uploads/2021/12/report-01.png)](https://optumce.com/wp-content/uploads/2021/12/report-01.png) [![](https://optumce.com/wp-content/uploads/2021/12/report-02.png)](https://optumce.com/wp-content/uploads/2021/12/report-02.png) [![](https://optumce.com/wp-content/uploads/2021/12/report-03.png)](https://optumce.com/wp-content/uploads/2021/12/report-03.png) [![](https://optumce.com/wp-content/uploads/2021/12/report-04.png)](https://optumce.com/wp-content/uploads/2021/12/report-04.png) [![](https://optumce.com/wp-content/uploads/2021/12/report-05.png)](https://optumce.com/wp-content/uploads/2021/12/report-05.png) [![](https://optumce.com/wp-content/uploads/2021/12/report-06.png)](https://optumce.com/wp-content/uploads/2021/12/report-06.png) [![](https://optumce.com/wp-content/uploads/2021/12/report-07.png)](https://optumce.com/wp-content/uploads/2021/12/report-07.png) [![](https://optumce.com/wp-content/uploads/2021/12/report-08.png)](https://optumce.com/wp-content/uploads/2021/12/report-08.png) [![](https://optumce.com/wp-content/uploads/2021/12/report-09.png)](https://optumce.com/wp-content/uploads/2021/12/report-09.png)

Congratulations! You have completed Tutorial 1.